How to Refinish Kitchen Cabinets in High Gloss White

How to Refinish Kitchen Cabinets in High Gloss White

nothing reinvigorates a kitchen like a gloss of clean paint over the cabinets. if you want your kitchen to polish like new, then refinishing in excessive-gloss white will do the trick. Refinishing takes a variety of paintings, mainly if you want the glasslike sheen that excessive-gloss paints can gain; however your efforts might be nicely spent, and doing it yourself will price you tons less than hiring a professional to do the job.

put off the doors of the shelves at the side of the hinges and handles, using the screwdriver. hold the hardware in a plastic bag or box.

smooth the cabinet very well inner and out with the deglosser. Use rubber gloves and a nylon scourer while cleansing, and comply with the instructions on the deglosser label. Rinse the shelves with easy water and rub them dry with a soft cloth.

check out the shelves for dents, scratches or every other imperfections. Scrape wooden putty over the dents or scratches to fill them, and let the putty dry. take a look at the putty label for approximate drying times.

placed on your dust masks, then sand all of the shelves with 150-grit sandpaper. Wipe over the cabinets with a smooth material to do away with sanding dirt.

masks off the cupboard surrounds with painters tape to guard the partitions, and cover the benches, sink and any bench-pinnacle appliance with a drop cloth.

Paint a coat of primer onto the shelves, portray alongside the grain of the timber. in case you're the use of a roller, press gently in any other case the primer will bubble. let the surfaces dry the amount of time stipulated on the primer's packaging label.

Sand the cabinets with 220-grit sandpaper once the primer is dry. Wipe over the sanded region with the gentle material, then brush on another coat of primer and leave to dry.

Sand the shelves once more with 220-grit sandpaper, and wipe the floor again. apply coats of high-gloss white paint inside the same way you did the primer, allowing the paint to dry and sanding among every coat. The sanding among coats may also seem tiresome, however it's far the key to accomplishing a great-smooth, glasslike end.

go away the shelves to dry for not less than days before reattaching the hardware and striking the cabinet doorways. This ensures that the paint is cured nicely and received't scratch while you connect the hardware.

Source: here

Leave a comment